The space above a parking lot is one of the most overlooked assets in commercial properties, industrial parks, and logistics facilities. Chiko Solar’s Type-7 Carport integrates photovoltaic power generation with vehicle sheltering, allowing site owners to add energy output without occupying additional land. Single-crystal silicon PV modules installed on the roof deliver approximately 4kW of capacity per standard parking bay. The electricity generated during daylight hours can be directed to on-site lighting, surveillance systems, and EV charging stations, while surplus power feeds into the grid or a storage system — making the return-on-investment timeline straightforward to calculate.
停车场顶部长期闲置的空间，往往是企业园区、物流仓储和商业地产最容易被忽视的资产。晨科太阳能7型车棚将光伏发电与停车遮蔽合二为一，以实用的结构设计帮助业主在不额外占地的前提下，让停车区域同时承担发电功能。顶部铺设单晶硅光伏组件，每个标准车位对应约4kW装机容量，白天发出的电力可优先供给停车场照明、监控及充电桩使用，多余电量并网或接入储能系统，投资回收周期清晰可预期。
The Type-7 frame is built from Q355 hot-dip galvanized steel with aluminum alloy purlins, engineered to meet both wind and snow load requirements across different climate zones. The galvanized finish provides a corrosion service life exceeding 25 years. All connection nodes use anti-loosening bolts verified through vibration testing, ensuring long-term stability under the continuous ground vibration caused by vehicle traffic. An integrated drainage channel is recessed into the purlin profile, channeling rainwater away from the parking surface in a controlled manner.
主体采用Q355热镀锌钢结构，横梁选用铝合金型材，整体设计经过风荷载与雪荷载双重校核，适配国内不同气候区的工程要求。主立柱镀锌防腐年限超过25年，连接节点全部使用防松螺栓，经振动测试验证可承受车辆长期进出带来的地面微振动。顶部设有组织排水槽，内嵌于横梁结构内，有效避免雨水漫流至停车区域，细节处理到位。
All steel components — cutting, drilling, and galvanizing — are completed at the factory before shipment. On-site assembly requires only bolt connections with no heavy lifting equipment, and a standard bay section can be erected within a single working day. Two foundation options are available: independent pile foundations or pre-embedded base plates, both of which minimize damage to existing concrete surfaces and suit retrofit projects equally well. Aluminum clamps, waterproof sealing strips, and junction box brackets are packed with the shipment, so construction can begin immediately upon arrival with no waiting for supplementary materials.
在安装与施工层面，7型车棚采用工厂标准化预制方式，钢构件下料、钻孔、镀锌全部在生产线完成，现场只需螺栓组装，无需大型起重设备，单个标准车位区块一天内即可完成主体安装。地基方案支持独立桩基与预埋板两种形式，对已有混凝土地坪破坏面积极小，改造项目同样适用。铝合金压块、防水密封条、接线盒支架等配件随货配发，收货后即可连续施工，减少等料停工。
The Type-7 layout is available in single-row, double-row, and multi-span configurations, with span width and eave height customizable to match actual bay dimensions for passenger cars, SUVs, and light commercial vehicles. A complete set of structural drawings and a full BOM list is provided at project handover, giving maintenance teams a clear reference for future inspections. To receive a preliminary design proposal and quotation, simply share the number of parking bays and a site plan.
布局方面，7型车棚支持单排、双排及多跨连廊等形式，跨度与檐口高度均可按实际车位尺寸定制，乘用车、SUV及轻型货车均可兼容。项目竣工后随附完整施工图与BOM清单，方便运维人员日后对照检修。如有项目需求，提供停车位数量与场地平面尺寸，即可快速获取初步方案与报价。
Post time: Sep-11-2026