The four-post structure is a well-recognized solution for PV carports and ground-mounted solar stations. CHIKO Solar four-post PV mounting system features a symmetrical four-pillar layout for even load distribution and enhanced overall rigidity. It is suitable for various project scenarios including commercial & industrial parks, parking lots and open areas within factory premises.
四立柱结构是光伏车棚、地面电站里认可度很高的方案，晨科太阳能四立柱光伏支架，依靠对称四柱布局，受力均匀分散，整体刚性更强，适合工商业园区、停车场、厂区空地等多种项目场景。
The four pillars work together to bear loads. Compared with single-post and double-post alternatives, it offers greater safety margin for wind and snow loads. It delivers superior structural stability under severe weather such as heavy snow and strong winds, lowering deformation risks and reliably protecting PV modules as well as vehicles parked underneath. The mount is made of high-strength hot-dip galvanized steel or aluminum profiles, equipped with stainless steel fasteners. The thick anti-corrosion coating renders it highly resistant to rust under coastal salt spray and humid outdoor conditions, granting long service life and low maintenance requirements.
四根立柱协同承重，对比单柱、双柱款式，抗风、抗雪承载余量更足，面对暴雪、强风等恶劣天气，结构稳定性更好，降低形变风险，稳妥保护光伏组件以及下方停放车辆。支架选用高强度热镀锌钢材或铝合金型材，搭配不锈钢紧固件，防腐层厚实，沿海盐雾、潮湿露天环境下不易锈蚀，使用寿命长久，后期运维压力小。
The whole mounting system adopts standardized modular production. Pre-fabricated components are assembled on site mainly with bolts, with no extra cutting or welding required. It enables easy installation, shorter construction periods and reduced labor costs. Pillar height, module tilt angle and overall span can be adjusted as required. Compatible with multiple foundation types such as concrete foundations and driven piles, it allows neat continuous arrangement and blends harmoniously with the factory environment.
整套支架采用标准化模块化生产，构件预加工成型，现场以螺栓拼装为主，无需额外切割焊接，施工便捷，有效缩短工期，减少人工成本。立柱高度、组件倾角、整体跨度均可按需调整，适配混凝土基础、地桩等多种基础形式，连片排布整齐美观，和厂区环境自然融合。
This mounting system realizes dual land utilization. PV modules installed on top generate electricity for self-consumption on site first to cut power bills, and surplus power can be fed into the grid for extra revenue. The open space below can be used as parking bays or material storage areas, fully unlocking idle land without occupying additional land resources.
这套支架实现一地两用，上方铺设光伏组件发电，优先供给厂区自用，降低用电开支，余电可并网产生收益；下方形成开阔空间，可作为停车位、物料堆放区，充分盘活闲置场地，不额外占用土地资源。
With years of experience in PV mounting solutions, CHIKO develops customized layout plans based on plot dimensions and local load conditions. We provide pre-site survey, scheme design and on-site installation guidance. Strict quality control is implemented from raw material processing to final delivery, balancing structural safety, construction efficiency and long-term returns. It is a reliable choice for commercial and industrial PV projects.
晨科拥有多年光伏支架配套经验，可根据地块尺寸、当地荷载条件定制排布方案，配套前期勘测、方案设计以及现场安装指导。从原料生产到落地交付层层把控，兼顾结构安全、施工效率与长期收益，是工商业光伏项目稳妥的选择。
Post time: Oct-30-2026